-
1G1F+2WIFI+POTS GPON ONU
Support EPON Standard of China Telecom EPON CTC3.0Support ONU auto-discovery/Link detection/remote upgrade of software WAN connections support Route and Bridge mode Route mode supports PPPoE/DHCP/ static IPSupport WIFI Interface and multiple SSID Support QoS and DBA Support port Isolation and port vlan configurationSupport Firewall function and IGMP Snooping/Proxy multicast feature Support LAN IP and DHCP Server configuration Support Port Forwarding and Loop-DetectSupport TR069 remote configuration and maintenanceSpecialized design for system breakdown prevention to maintain stable system。
Designed as HGU (Home Gateway Unit) in deferent FTTH solutions by T-TECH, The carrier-class FTTH application provides data service access.
Based on mature and stable, cost-effective EPON technology. It can access to the major EPON OLT.
Adopts high reliability, easy management, configuration flexibility and good quality of service (QoS)guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
Designed by Realtek chipset 9603C.
Technical item Details PON Interface 1 EPON port(EPON PX20+ ) Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM Wavelength TX: 1310nm, RX: 1490nm Optical Interface SC/UPC Connector LAN Interface 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector Wireless Compliant with IEEE802.11b/g/n, Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps, 2T2R,2 external antenna 5dBi, Support: multiple SSID Channel: Auto Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM LED 7 LED, For Status of WIFI,WPS,PWR,LOS,PON,LAN1~LAN2 Push-Button 3,For Function of Reset,WLAN,WPS Operating Condition Temperature: 0℃~+50℃ Humidity: 10%~90%(non-condensing) Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%(non-condensing) Power Supply DC 12V/1A Power Consumption ≤6W Dimension 155mm×92mm×34mm(L×W×H) Net Weight 0.24Kg Pilot Lamp
Status
Description
WIFI
On
The WIFI interface is up. Blink
The WIFI interface is sending or/and receiving data (ACT). Off
The WIFI interface is down. WPS
Blink
The WIFI interface is securely establishing a connection. Off
The WIFI interface does not establish a secure connection. PWR
On
The device is powered up. Off
The device is powered down. LOS
Blink
The device doses not receive optical signals. Off
The device has received optical signal. PON
On
The device has registered to the PON system. Blink
The device is registering the PON system. Off
The device registration is incorrect. LAN1~LAN2
On
Port (LANx) is connected properly (LINK). Blink
Port (LANx) is sending or/and receiving data (ACT). Off
Port (LANx) connection exception or not connected. ApplicationTypical Solution:FTTO(Office)、 FTTB(Building)、FTTH(Home)
Typical Business:INTERNET、IPTV、IP Camera 、WIFI etc
T-1G1F+2WIFI+POTS-GU 1G1F+2WIFI+POTS (9603C Scheme) PCS T-1G3F+2WIFI+POTS-GU 1G3F+2WIFI+POTS (9603C Scheme) PCS